Reliable result unidrain® is placed against the wall, so there only needs to be a one-sided slope instead of the traditional slope from all sides. This makes it easier to carry out correct levelling without the risk of depression or reverse slope. The result is that the floor is completely flat. That makes it easier to lay large tiles, as they do not have to be cut around the drain. The result is a waterproof and secure finish.
The ShowerLine design comes in two versions: ShowerLine and ShowerLine Flex
ShowerLine is an enhancement of the original drain fitting. Here two rails are welded to the ends: One to fit to the side wall and one to mount the shower screen in.
The ShowerLine Flex is a loose module to be screwed onto a standard drain fitting, with the shower screen fitted into it.
A complete GlassLine solution comes in four parts:
Can be combined with drain unit, outlet unit, frame, grating/panel and shower screen from the permanent range
The shower screen can be installed either before or after tile fitting
The shower door is adapted to the height and width of unidrain's GlassLine shower wall
A top rail is recommended for stabilising shower screens measuring 1,200 mm or more
The intelligent mat systemMatLine consists of: Mat, frame, sand trap and fitting. It also comes with a hook to make the mat easier to handle. The mat sits flush with the surrounding floor and is surrounded by a slim metal frame in brushed stainless steel. There is a strainer under the mat to catch sand and gravel. Below that is the fitting, which is cast into the floor. Height-adjustable feet can be added to facilitate installation.