Idea and principle



 

A floor drain is designed to divert water away from the shower area. The surrounding floor needs to have the correct fall towards the drain. If the fall is not sufficient – or even worse, if it slopes the wrong way – there is a risk of gaps and leakage, which can cause expensive damage to the building over the years. 

Before Unidrain came onto the market, there was only the square floor drain in the middle of the shower area, requiring the correct fall from four sides. The square drain therefore complicates laying the floor and subsequent tiling. The solution to this problem was the basic idea behind Unidrain, and Unidrain found the perfect answer with its narrow, linear floor drain: Unidrain's floor drain is placed right up against one wall, which means that there only needs to be a fall from one side. And Unidrain’s patented flanges in the wall and floor provide a waterproof transition between the floor drain, the floor and the wall. With Unidrain, one product therefore provided a technical, simple and smart solution to the two typical sources of damage from floor drains: the wrong slope and leakage.

Unidrain’s original idea and subsequent expansion of the product range have been thoroughly tested and meet all the standard requirements.

Patented wall flanges

Patented wall flanges

One drain - four parts

One drain - four parts

Corner drain

Corner drain

ShowerLine

ShowerLine

Installation videos



View all installation videos

Installation guidelines



View all installation guidelines

2D & 3D drawings



View all 2D and 3D drawings

Approvals

Complies with the new joint European norm EN1253

Approved for wet rooms in class H (Hard stress load)

Fulfils the requirements of the new building regulations

unidrain®'s unique construction is patented in Europe (1287213) and awaiting patent approval in several countries world-wide

unidrain® is a registered trademark









Draw and Calculate

Use the configurator to calculate which elements you need for your project.
When you have finished, you can simply send the component list to yourself or print it directly.

Do you need a customised solution?
Unidrain can provide most products in non-standard dimensions. Contact us for options for your project

Tel. +45 3910 1010
[email protected]


Calculate bespoke drains

Use the configurator to calculate bespoke drains 

Do you need customised solutions?
Unidrain bespoke (Module 1100) can be made to order to any size. Customised drains are especially suited to institutions and large bathrooms, as they can be made to the exact length and width you require. Calculate your bespoke drain here


Tel. +45 3910 1010

[email protected]