Patented wall flanges mean that Unidrain’s linear drain can be placed right up against the wall in the shower cubicle, hence just one full slope needs to be built in during installation, giving you a uniformed and minimalistic look.
The system was developed by the Danish architect Claus Dyre, which in addition to a beautiful appearance in the bathroom also resulted in an easy and safe installation.
Unidrain has developed a linear drain which will fit any project that you may have. This way you can easily go from drawing to realization of the bathroom of your dreams without having to compromise.
Unidrain’s floor drain is tested and approved for use in any type of construction – whether these are heavy concrete structures or light wooden floor joist structures.
You can download detailed construction guides below.
The linear drain with our ClassicLine design comes with a grating in brushed stainless steel and is Unidrain’s very first product range to be launched.
The ClassicLine series consists of six different designs, which means there’s a solution for every taste.
Unidrain’s floor drain for placement against the wall was developed by the Danish architect Claus Dyre. Every time he was to design a new bathroom, he was met with the challenge of having to break up beautiful tiles in the shower area to make the drain fit in the middle of the floor.
The solution was the line drain, and with patented wall flanges it became possible to move the drain to the back wall of the shower cubicle. The flanges are about 5 cm high and ensure that the water from the drain never gets near the supporting elements, which can’t withstand moisture.
With simple and precise installation, and the option of using large tiles in the bathroom, the solution also provides a flat floor with a one-sided slope, which diverts the water away effectively.
Unidrain’s solution consists of an outlet unit, a drain unit, a frame, and a panel or grating.
Our well known linear drain solution is placed against the wall can be used in all types of constructions and buildings. This solution creates a safe and 100% waterproof installation and comes with all the relevant approvals and certifications both
The liniar drain is available in both the ClassicLine and HighLine series.
You may not always be able to place the linear drain against the wall, therefore Unidrain has developed a free standing linear drain solution to give you further options. This provides a lot of new and exciting opportunities for the architect.
We also have a design solution for vinyl flooring.
For shower cubicle with open right side, glass screen or similar.
For shower cubicle with open left side, glass screen or similar.
Can be freely positioned against rear wall, independent of any side walls.
Right drain.
Can be freely positioned against rear wall, independent of any side walls.
For use with ClassicLine only.
Left drain.
Can be freely positioned against rear wall, independent of any side walls.
For use with ClassicLine only.
Can be freely positioned against rear wall, independent of any side walls.
The rear flange is set 6 mm back, so it can be used with 20 mm wall tiles + tile adhesive and wet room membrane.
Only for HighLine Custom frameless.
Can be freely positioned against rear wall, independent of any side walls.
The rear flange is set 12 mm back, so it can be used with 20 mm wall tiles + tile adhesive and wet room membrane.
ClassicLine or HighLine frame must be used.
Unidrain is suitable for all floor constructions. You can find the installation guide for your construction below.
Modtager du ikke allerede vores nyhedsbrev, så skriv dig op her til at modtage markedsføring vedrørende Unidrains produktsortiment via vores nyhedsbrev for professionelle. Du vil modtage vores nyhedsbrev ca. 8 gange om året.
